Right where you want it.
Chances are your current substrate supplier can also provide you with DuPont™ Tyvek®.
DuPont™ Tyvek® material is available in multiple forms and through many distribution channels throughout the world.
Tyvek® Type 10 is available from distributors and select paper merchants in full rolls, slit rolls or sheets. Lists of distributors that sell rolls or sheets of uncoated, as well as coated, colored or pressure-sensitive coated Tyvek®, may be obtained by contacting DuPont at 1-800-448-9835 or at www.graphics.dupont.com.
DuPont ships Tyvek® protected by stretch-wrap film. Narrow-width rolls are shipped with more than one roll per package. Some rolls may contain splices with each splice identified with a flag. Like paper, Type 10 has different surface characteristics on each side and is wound with the smooth side out. Type 14 products are wound with the linen side out. This information is on the package label.
Tyvek® Type 10 products are available in a variety of widths on nominal 28-in (0.7-m) or 39-in (1-m) O.D. rolls with 3-in (7.6 cm) I.D. cores. Rolls of Type 14 products are also available on 3 in (7.6 cm) I.D. cores, with roll diameters of 21.5 in (0.54 m), 28 in, or 39 in (1 m) O.D. No chuck notches are supplied in the 0.425-in (1.1 cm) thick heavy paper cores. Not all widths and diameters are available in all styles.
CONTENTS LABELS
The package label for Tyvek® will be found on the outside of each package. A core label will be found on the inside of the core. We suggest that customers record package numbers and retain them throughout processing. Inquiries about specific rolls should always refer to the package number.
Return to the User’s Manual Table of Contents
|
Print Page